Samsung HW-D650S Manuel d'utilisateur Page 44

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 120
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 43
44 English
Setup
HDMI Setup
Use this if you want to receive audio from HDMI connected external devices.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the ▲▼ buttons to select OPTION, and then press the
ENTER button.
Press the ▲▼ buttons to select HDMI SETUP, and then press
the ENTER button.
Press the ▲▼ buttons to set the HDMI Setup mode you want,
and then press the ENTER button.
Press the ▲▼ buttons to set you want.
AUTO SYNC : ON, OFF
The AV receiver can be set to automatically correct any delay
between the video and the audio, based on the data from the
connected TV.
- ON : HDMI Sync is enabled.
- OFF : HDMI Sync is disabled.
HDMI AUDIO : AVR(Audio Video Receiver), TV
This preference determines whether audio received at the HDMI IN is output by the HDMI OUT.
If you want to listen to audio from an HDMI connected external device through your HDMI
connected TV's speakers, set it to TV. Otherwise, leave it on AVR to listen to audio from the A/V
receiver.
- AVR : HDMI audio is not output - TV : HDMI audio is output
HDMI ANYNET+ : ON, OFF
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung
TV's remote control.
- ON : Anynet+ is enabled.
- OFF : Anynet+ is disabled.
ARC : AUTO , OFF
If you use the HDMI cable to connect between HDMI IN of an Audio Return Channel-compliant
TV and HDMI OUT (ARC) of the main unit, you can listen to the TV sound through the main unit
connected speaker without the further connection.
- AUTO : The audio signal from the TV can be sent to the HDMI OUT of the main unit.
- OFF : Turn TV ARC funtion off.
NOTE
HDMI Audio is enabled only if both the HDMI INPUT and HDMI OUT are connected properly and
working normally.
HDMI Sync function works only if your HDMI compatible TV supports this function.
If HDMI ANYNET+ is set to OFF, TV ARC will be set to OFF accordingly that cannot switch to
AUTO.
The ARC function will be active only via the HDMI OUT terminal.
1.
2.
3.
4.
5.
HW-D600_D650S_XAC_0614.indd 44HW-D600_D650S_XAC_0614.indd 44 2011-06-17  10:35:262011-06-17  10:35:26
Vue de la page 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 119 120

Commentaires sur ces manuels

Pas de commentaire