Samsung SEW-3030 Manuel d'utilisateur télécharger pdf (Page 10)

Wireless Receiver Installation

After opening the box, fully charge the monitor before use. After initial charge,

recharge as needed.

1. Place the receiver in a place that will have clear reception with your

camera(s).

2. If you wish to view the receiver images on a larger screen, connect the

included AV cable to the receiver, and connect the other end of the cable to the

Video IN (Yellow) and Audio IN (White) ports on the TV, VCR or other

viewing/recording device.

If you wish to view the receiver images on a computer, connect one end of the

included USB cable to the receiver, and connect the other end of the cable to

the USB port on the computer. You will need to install drivers contained in the

enclosed disc first.

NOTE: When using with a TV or computer monitor, the picture may appear to

be grainy as the camera limits video resolution to VGA (640x480 pixels). This is

not a product defect. For best performance, use with the TV/Monitor PIP

(Picture in Picture) function.

Check your TV/Monitor product manual to see if this feature is available on your

TV/Monitor. This allows you to view TV or other video source and see video

from the camera in a small window on the same screen.

Wireless Camera

Front & Back Controls

1. Camera Antenna – Sends & receives signals to or from the receiver.

2. Night Light Switch – Press to turn the night light ON or OFF. Alternatively,

press the light button on the receiver to remotely turn the camera light ON or

OFF.

Note: Night Light is available only when the camera is paired to the receiver.

3. Lens/IR LED Cover – Infrared LED’s provide viewing in no/low light

conditions

4. Temperature Sensor ㅡ Gives an indication of the air temperature where the

camera is placed

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

Pas de commentaire

Samsung SEW-3030 Manuel d'utilisateur Page 10