Samsung DVD-C350K Manuel d'utilisateur télécharger pdf (Page 5)

connections

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV

and other components.

Before Connecting the DVD Player

- Always turn off the DVD player, TV, and other components before you connect or disconnect

any cables.

- Refer to the user’s manual of the additional components you are connecting for more informa-

tion on those particular components.

A. Connecting to a TV (VIDEO)

- Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals

on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.

- Turn on the DVD player and TV.

- Press the input selector on your TV remote control until the Video signal from the DVD player

appears on the TV screen.

Note

- Noise may be generated if the audio cable is placed too close to the power cable.

- If you want to connect to an Amplifier, please refer to the Amplifier connection section below.

- The number and position of terminals can vary depending on your TV set.

Please refer to the user's manual of the TV.

- If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal

of the DVD player.

- If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the

Video Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN ).

C. Connections to a TV Interlace / Progressive

- Using Component video cables (not included), connect the COMPONENT VIDEO OUT (PR, PB

and Y) jacks on the rear of the DVD player to the COMPONENT IN (PR, PB and Y) jacks of your

TV.

- Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the

DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

- Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO

SEL. button to change the Video Output mode.

B. Connection to an Audio System (2 Channel Amplifier, Dolby

Digital,MPEG2 or DTS Amplifier)

- Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the

DVD player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable,

connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the

DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

- Using the video signal cable(s), connect the VIDEO or COMPONENT terminals on the rear of the

DVD player to the VIDEO or COMPONENT terminals of your TV.

- Turn on the DVD player, TV, and Amplifier.

- Press the input select button of the Amplifier to select external input in order to hear sound

from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Note

- What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace

output method has. Progressive scanning method can provide better and clearer picture quality.

2-Channel stereo ampilﬁer,

Dolby digital or

DTS ampliﬁer

COAXIAL CABLE

COMPONENT CABLE

VIDEO CABLE

RED

WHITE

RED

WHITE

YELLOW

RED BLUE GREEN

RED

BLUE GREEN

RED

WHITE

RED

AUDIO CABLE

- Press the input selector on your TV remote control until the Component signal from the DVD

player appears on the TV screen.

- Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO

SEL. button to change the Video Output mode.

1 2 3 4 5 6 7 8 9 10 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Samsung DVD-C350K Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Samsung DVD-C350K