Samsung DV52J8700GW Manuel télécharger pdf (Page 23)

English 23

Installation

8. Four Wire System instructions:

A. External ground connector

B. Green or bare copper wire of power

cord

C. ¾” (1.9 cm) UL-listed strain relief

D. Center silver-colored terminal block

screw

E. Neutral grounding wire (white)

F. Neutral wire (white or center wire)

a. Remove the External ground

connector screw.

b. Connect the ground wire (green

or unwrapped) of the power cord

to the external ground connector

screw. If you want to connect

B (Green or bare copper wire

of power cord) to the Neutral

Post without connecting it to A

(cabinet ground), call a service

technician.

c. Loosen or remove the center

terminal block screw.

d. Connect the neutral wire (white

or center wire) of the power cord

and the appliance ground wire

(white) under the central screw

of the terminal block.

e. Connect the other wires to the

outer terminal block screws.

Tighten screws.

f. Tighten the strain relief screws.

g. Insert the tab of the terminal

block cover into your dryer’s rear

panel slot.

Secure the cover with a hold-

down screw.

NOTE

We recommend using ring terminals. If you use strap terminals, please ensure you install

them perfectly.

DV8000J-03170M-01_EN-US_150122.indd 23 2015/1/23 16:29:57

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 191 192

Pas de commentaire

Samsung DV52J8700GW Manuel Page 23