Samsung SRG-148 Manuel d'utilisateur télécharger pdf (Page 6)

INITIAL USING METHOD

EN:

1. Place all shelves, all kinds of vessels in their proper positions

which have been removed for transportation.

2. Clean refrigerator and parts to remove dust incurred during shipping.

3. Set cold control knob at "COLD" position and let refrigerator oper-

ate for one hour. Freezer compartment should get slightly chilled

and motor should run smoothly with no noise but soft hum.

4. Store food after the temperature in the refrigerator gets suffi-

ciently low. It takes a few hours after starting the refrigerator to

reach the proper temperature.

5. Your refrigerator is operated by a compressor which switchs "on

and off" to maintain the intemal temperature. When the compre-

ssor is new it requires running in for a period of up to 2 months.

During this period it may operate a little noiser than normal. This

is quite normal and does not represent a fault.

EN: Follow the steps before to begin operation of your refrigerator.

CONTROL SETTINGS

The temperature control maintains the temperature

in the refrigerator. Setting the control at COOL is the

warmest setting. Setting the control at COLDEST is

the coldest setting. Set the control at COLD.

Allow 24 hours for the refrigerator to reach the COLD

temperature. If you want a colder or warmer

temperature,move the dial one setting at a time.

Moving the control to OFF stops cooling but does

not turn off the power to the refrigerator. Setting the

control to one of the snowflake positions may cause

freezing the refrigerator depending on the room

temperature.

How To Test Temperatures

Use the milk test. Place a container of milk on a

shelf and check it a day later. If the milk is too warm

or too cold, adjust the temperature control.

After changing the control, allow 24 hours for the

refrigerator to reach the temperature you have set.

EN:

OFF

COLD

COOL

COLDEST

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Pas de commentaire

Samsung SRG-148 Manuel d'utilisateur Page 6