Samsung HW-J250 Manuel d'utilisateur télécharger pdf (Page 13)

ENG

CONNECTIONS

INSTALLING THE BRACKET WITHOUT REFERRING TO THE

WALL-MOUNT INSTALLATION GUIDE

2 inches

(5 cm) or more

2 inches

(5 cm) or more

6.3 inches

(16 cm)

6.9 inches

(17.5 cm)

Minimum 12.9 ~ 13.2 inches

(32.8 ~ 33.5cm)

1. Place Wall Mount L on the desired wall surface parallel to the floor as shown above. Mark the location of the

screw holes on the wall. Drill holes for the screws at the places you have marked.

2. Match the screw holes on Wall Mount L to the screw holes on the wall, and then screw one screw through the

hole in its right end. Tighten the screw until it is firmly fixed to the wall.

3. Place Wall Mount R on the desired wall surface parallel to the floor and aligned with Wall Mount L as shown above. Mark the

location of the screw holes on the wall. Drill holes for the screws at the places you have marked.

4. Match the screw holes on Wall Mount R to the screw holes on the wall, and then screw one screw through the

hole in its right end. Tighten the screw until it is firmly fixed to the wall.

●

If you are mounting the Wall Mounts beneath the TV, make sure to position the mounts 2 inches (5 cm) or more

below the TV and to align the mounts with the center of the TV as shown above.

5. Insert screws through the remaining holes, and then tighten.

02839C-HW-J250-ZC-ENG-20150313.indd 13 2015/3/14 15:14:34

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 24 25

Pas de commentaire

Samsung HW-J250 Manuel d'utilisateur Page 13