Samsung 700TSN-2 Manuel d'utilisateur

iiLCD DISPLAYquick start guide700TSn-2,820TSn-2

1. POWERTurns the product On.2. OFFTurns the product Off.3. Number Buttons Press to change the channel.4. DEL / GUIDE but-tonThe "-" bu

broadcasting type by using the DUAL button on the remotecontrol while watching TV.14. ENTER/PRE-CHThis button is used to return to the immediate

LCD Display HeadInstallation VESA Bracket• When installing VESA, make sure to comply with the international VESA standards.• Purchasing VESA Bracket

NoticeFor securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12mm length.Wall Bracket Installation• Contact a technicia

There are two hinges(left and right). Use the correct one.A - Captive ScrewB - Wall BracketC - Hinge (Left)D - Hinge (Right)2. Before drilling into th

1. Remove the 4 screws on the back of the product.2. Insert the screw B into the plastic hanger.Notice• Mount the product on the wall bracket and make

A - LCD DisplayB - Wall BracketC - WallWall Bracket Angle AdjustmentAdjust the bracket angle to -2° before installing it on the wall.1. Fix the produc

Mechanical Layout (820TSn-2)Mechanical LayoutLCD Display HeadInstallation VESA Bracket• When installing VESA, make sure to comply with the internation

• At least 2 persons are needed in order to move the LCD Display.• SAMSUNG is not responsible for any product damage or any injury caused by installat

Wall Bracket(1) Hinge(Left 1, Right1)PlasticHanger(4)Screw(A)(11)Screw(B)(4)Anchor(11)Wall Bracket Assembly NoteThere are two hinges(left and right)

IntroductionPackage Contents NotePlease make sure the following items are included with your LCD Display.If any items are missing, contact your dealer

A - Length between the two locking holes3. Check the installation diagram and mark the drill points on the wall. Use the 5.0 mm bitto drill holes deep

2. Insert the screw B into the plastic hanger.Notice• Mount the product on the wall bracket and make sure it is properly fixed to the leftand right pl

A - LCD DisplayB - Wall BracketC - WallWall Bracket Angle AdjustmentAdjust the bracket angle to -2° before installing it on the wall.1. Fix the produc

ConnectionsConnecting a ComputerThere are several ways to connect the computer to the monitor. Chooseone from the following options. Using the D-sub

Using the HDMI (digital) output on the graphics card.• Connect the HDMI IN port on the monitor to the HDMI port on the PCusing the HDMI cable. NoteWh

• The LCD Display 's configuration at the back may vary slightly depending on the LCDDisplay model.Connecting AV Devices1. Connect the Video and

NoteThe audio-video cables shown here are usually included with a Camcorder. (If not, checkyour local electronics store.) If your camcorder is stereo

2. Select HDMI using the SOURCE button on the front of the LCD Display or on the remotecontrol. NoteIn HDMI mode, only PCM format audio is supported.C

Connecting the Touch Screen USB hub NoteTo use the touch screen function in MagicInfo mode, flip the toggle switch to the left.To use the touch screen

You can connect USB devices such as a mouse or keyboard.Connections35

IntroductionPackage Contents NotePlease make sure the following items are included with your LCD Display.If any items are missing, contact your dealer

TroubleshootingSelf-Test Feature Check NoteCheck the following items yourself before calling for assistance. Contact a Service Center forproblems that

• Do not use benzene, thinner or other flammable sub-stances.2) Maintaining the Flat Panel Display Screen.Clean with a soft cloth (cotton flannel).• N

A: Check if the signal cable between the computer and the LCD Display is securely con-nected.(Refer to Connecting a Computer)Problems related to the S

Q: The screen color is inconsistent.A: Adjust color using Custom under OSD Color Adjustment menu.Q: The color image is distorted by dark shadows.A: Ad

A: Check if the batteries are empty.A: Check if the power is on.A: Check if the power cord is securely connected.A: Check if a special fluorescent or

NoteBefore calling for assistance, check the information in this section to see if you can remedyany problems yourself. If you do need assistance, pl

LCD DisplayManualsQuick Setup Guide Warranty Card(Not available in all loca-tions)User's GuideMagicInfo Software CD,MagicInfo Manual CDCables Pow

Your LCD DisplayFrontMENU button [MENU]Opens the on-screen menu and exits from the menu. Also use to exit theOSD menu or return to the previous menu.N

Use this button for turning the LCD Display on and off.Brightness Sensor (Optional)Automatically detects the surrounding brightness it accordingly. No

RS232C OUT/IN (RS232C Serial PORT)MDC(Multiple Display Control) Program Port RGB/COMPONENT IN (PC ConnectionTerminal (Input))• Use a D-Sub Cable (15

NoteUp to 6 Full HD or 10 HD monitors can beconnected (May differ depending on theproduct). AV IN [VIDEO]Connect the [ VIDEO ] terminal of your

RGB OUT LAN (LAN Connection Terminal) USB1,USB2 (USB Connection Terminal)Keyboard / Mouse, Mass Storage DeviceCompatible. NoteSee Connecting Cab