Samsung NX58K7850SS Manuel d'installation télécharger pdf (Page 22)

22 English

Installation instructions

Precise Simmer Burner (RR)

Flat surface

NOTE

The caps on Precise simmer burner

(RR) and inside Dual Burner (RF) can be

interchangeably used.

3. Place the left, center, and right surface

burner grates on the cooktop. The

edges of the grates should match up

with the edges of the cooktop.

3. If range is next to or between cabinets,

make sure the cooktop (without the

surface burner grates) is level with the

countertops.

4. Position an oven rack in the center rack

position.

5. Check the level of the range with a

carpenter level using the two positions

shown at right.

6. After the range becomes level, slide the

range away from the wall so that the

anti-tip bracket can be installed.

Step 7. Assemble the surface burners

CAUTION

Do not operate the surface burners without

all burner parts in place.

1. Position surface burner heads on top of

the surface burner manifolds as shown

at right. The electrodes will t into the

slot in the bottom of the heads. Make

sure the surface burner heads are at

and parallel with the cooktop.

2. Place the matching size caps on top of

each surface burner head.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 83 84

Pas de commentaire

Samsung NX58K7850SS Manuel d'installation Page 22