Samsung LabelManager Series Guide de l'utilisateur télécharger pdf (Page 4)

Connecting the Power

The label maker is powered by a rechargeable, lithium-ion (Li-ion) battery pack.

Inserting the Battery

The battery pack included with your label maker comes partially charged.

Make sure the charging adapter is disconnected before handling the

Li-ion battery pack.

To insert the battery

1 Slide the battery compartment cover

away from the label maker. See

Figure 1.

2 Insert the battery into the battery

compartment as shown in Figure 1.

3 Replace the battery cover.

Make sure to read the Li-ion Safety

Precautions found on "Safety Precautions

for Lithium-ion Rechargeable Battery Pack" on page 8.

Removing the Battery

Remove the battery pack if the label maker will not be used for a long period

of time.

Make sure the charging adapter is disconnected before handling the

Li-ion battery pack.

To remove the battery

1 Unplug the charging adapter.

2 Slide the battery compartment cover away from the label maker.

See Figure 1.

3 Remove the battery from the battery compartment.

Make sure to read the Li-ion Safety Precautions found on page 8.

Figure 1

1 2 3 4 5 6 7 8 9 ... 13 14

Pas de commentaire

Samsung LabelManager Series Guide de l'utilisateur Page 4