Samsung TFT-LCD IP PUBLIC VIEW MONITOR Manuel d'utilisateur télécharger pdf (Page 27)

Connecting to a Camcorder

1. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the

camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder

and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .

2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN

[VIDEO] on the LCD Display .

3. Select AV for the Camcorder connection using the Source button on the front of the LCD Display

or on the remote control.

4. Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local

electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

Connecting Using a HDMI Cable

Note

• Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using

the HDMI cable.

• You cannot connect a PC to the HDMI terminal.

Connections

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 188 189

Pas de commentaire

Samsung TFT-LCD IP PUBLIC VIEW MONITOR Manuel d'utilisateur Page 27