Samsung GT-B7300 (Extended Usage Guide) Manuel d'utilisateur télécharger pdf (Page 36)

Alarm Manage:

Alarm Output: you can set how long the external sensor alarm will last when motion is detected (off,

10s, 20s, 40s, 60s);

Buzzer time: you can set how long the buzzer will sound when motion is detected (0s, 10s, 20, 40s, 60s);

Alarm duration time: you can set how long alarm record will last when alarm ends (0s, 30s, 1minute，

2minute，5minute);

Pre-record time: you can set how long record will last before alarm occurs (Off, on).

Full screen Alarm: The function is defaulted in “OFF" position. When the motion detection or external

alarm is triggered, the corresponding channel will be displayed on the full screen mode.

Email：The option allows you set the alarm images to send txt message to a specified email.

You could freely select buzzer alarm or not and alarm output time for all the alarm types, and for the

MD alarm and I/O status alarm you could set email and full screen reminder.

Alarm Type Function

Video Loss

Sends alarm when DVR can’t receive video signal (such as camera damage, cable

broken or damaged or power supply malfunction).

Motion

Detection

When an object moves into motion detection area, alarm will be triggered. You can

adjust sensitivity level to suit the needs of your actual application environment.

HDD loss

When Hard Drive is not detected (HDD damage, power supply malfunction), or HDD

auto-overwrite is off, and free space is not enough, an alarm will be triggered.

HDD space

When the HDD is full, the alarm will be triggered.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 126 127

Pas de commentaire

Samsung GT-B7300 (Extended Usage Guide) Manuel d'utilisateur Page 36