Samsung LS20CMYKF-ZM Manuel d'utilisateur

SyncMaster 2033SN/2233SNLCD MonitorUser Manual

IntroductionPackage Contents NotePlease make sure the following items are included with your monitor.If any items are missing, contact your dealer.Con

Your MonitorInitial SettingsSelect the language using the up or down key.The displayed content will disappear after 40 seconds.Turn the Power button o

NoteYou can configure the customized key for a required function via Setup >Customized Key.Adjust buttons [ ]These buttons allow you to adjust ite

The Kensington lock is a device used to physically fix the system when usingit in a public place. (The locking device has to be purchased separately.)

ConnectionsConnecting Cables Connect the power cord for your monitor to the power port on the back of the monitor.Plug the power cord for the monitor

Using the StandFolding the base NoteYou can tilt the monitor upwards at an angle of -1° to 20°(±1.0°).Attaching a BaseThis monitor accepts a 100 mm x

• Do not use screws that do not comply with the VESA standard screwspecifications.Do not fasten the screws too tightly, as this may damage the product

Using the SoftwareMonitor Driver NoteWhen prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Drive

NoteThis monitor driver is under certifying MS logo, and this installation doesn't damage yoursystem.The certified driver will be posted on Sams

If the message "Windows needs..." is displayed, as shown in the figure below, click"Continue". NoteThis monitor driver is under ce

Safety InstructionsNotational NoteThese safety instructions must be followed to ensure your safety and prevent property dam-age.Make sure to read the

9. Select the model that matches your monitor from the list of monitor models on the screen,and click "Next". 10. Click "Close" →

1. Insert CD into the CD-ROM drive.2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon.3. Cli

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model inthe model list and click the "Next" button.

10. Monitor driver installation is completed.Microsoft® Windows® 2000 Operating SystemWhen you can see "Digital Signature Not Found" on you

If you can see the "Digital Signature Not Found" window then click the "Yes" button. Andclick the "Finish" button then t

5. Set a Keyboard for your computer.6. The next screen is for setting your monitor.7. First of all, set a horizontal frequency for your monitor. (You

How to delete the Natural Color software programSelect "Setting/Control Panel" on the "Start" menu and then double-click "Add

System RequirementsOS•Windows 2000•Windows XP Home Edition• Windows XP Professional• Windows Vista™It is recommended using MagicTune™ in Windows® 2000

MultiScreenInstallation1. Insert the installation CD into the CD-ROM drive.2.Click the MultiScreen installation file. NoteIf the popup window to insta

Hardware• 32 MB Memory above•60 MB Hard disk space aboveUninstallThe Multiscreen program can be removed only by using the "Add or Remove Programs

Ensure that the power plug is plugged into the power outletfirmly and correctly.• Otherwise, this may result in fire. Do not forcefully bend or pull

Adjusting the Monitor{2033SN} Direct FunctionsAUTOWhen the 'AUTO' button is pressed, the auto adjustment screen appears as shown in theanima

This is the function that locks the OSD in order to keep the current states of settings or preventothers from adjusting the current settings.Lock : Ho

BrightnessWhen OSD is not on the screen, push the Brightness ( ) button to adjust brightness.OSD FunctionPicture Brightness Contrast Magic-BrightColor

Contrast(Not available in MagicBright mode of Dynamic Contrast.)You can use the on-screen menus to change the contrast according to personal preferenc

For working with a mixture of images such as texts and graphics.• GameFor watching motion pictures such as a game.• SportFor watching motion pictures

Color ToneThe tone of the color can be changed and one of four modes can be selected.• Cool - Makes whites bluish.• Normal - Keeps whites white.• Warm

Color EffectYou can change the overall mood by changing the screen colors.( Not available in MagicColor mode of Full and Intelligent. )• Off • Graysca

ImageCoarseRemoves noise such as vertical stripes.Coarse adjustment may move the screen image area. You may relocate it to the center usingthe horizo

Changes the clearance of image.( Not available in MagicColor mode of Full and Intelligent. )MENU → , → → , → → , → MENUH-PositionChang

OSDLanguageYou can choose one of nine languages. NoteThe language chosen affects only the language of the OSD. It has no effect on any softwarerunnin

DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIG-ARETTES AND ANY HEATING APPLIANCES NEAR THEPRODUCT.• Otherwise, this may result in fire. Keep heating a

Display TimeThe menu will be automatically turned off if no adjustments are made for a certain time period.You can set the amount of time the menu wil

Customized KeyYou can specify a function which will be activated when the Customized Key ( ) is press-ed.MENU → , → → , → → , →MENUOff

• Auto • Wide• Auto - The screen is displayed in accordance with the screen aspect ratio of the inputsignals.• Wide - A full screen is displayed regar

If auto adjustment does not work properly, press 'AUTO' button again to adjust picturewith more accuracy.If you change resolution in the con

Customized keyYou can customize key assignment for the Custom button according to your preferences.To view the operating screen displayed when pressin

Information PictureBrightness(Not available in MagicBright mode of Dynamic Contrast.)You can use the on-screen menus to change the brightness accordi

MagicBrightPush the button to circle through available preconfigured modes.MagicBright is a new feature providing optimum viewing environment depend

MagicColorMagicColor is a new technology that Samsung has exclusively developed to improve digitalimage and to display natural color more clearly with

Color ControlAdjusts individual Red, Green, Blue color balance.( Not available in MagicColor mode of Full and Intelligent. )MENU → , → → , →

GammaGamma correction changes the luminance of the colors with intermediate luminance.• Mode 1 • Mode 2 • Mode 3MENU → , → → , → → , →

Do not spray cleaner directly onto the surface of the product.• Otherwise, this may result in the discoloration and distortion ofthe structure and th

Removes noise such as horizontal stripes.If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clockspeed).MENU → ,

V-PositionChanges the vertical position of the monitor's entire display.MENU → , → → , → → , → MENU OSDLanguageYou can choose one

TransparencyChange the transparency of the background of the OSD.• Off • OnMENU → , → → , → → , → MENUDisplay TimeThe menu will be aut

SetupResetReverts the product settings to factory defaults.• No • YesMENU → , → → → , → MENUCustomized KeyYou can specify a function which

The monitors will turn off automatically at the specified time.• Off • OnMENU → , → → , → → , → → , → MENUImage SizeYou can change

Troubleshooting{2033SN} Self-Test Feature Check NoteYour monitor provides a self test feature that allows you to check whether your monitor isfunction

Useful TipsA monitor recreates visual signals received from the computer. Therefore, if there is a problemwith the computer or the video card, this ca

will work properly but the "Not Optimum Mode", "Recommended Mode 1600 x 90060 Hz" message appears for one minute and then disappea

(Refer to the Preset Timing Modes).LED is blinking but no images on the screen.Q: Is the frequency properly adjusted when checking the Display Timing

MagicTune™ doesn't work properly.Q: Have you changed your PC or video graphic card?A:Download the latest program. The program can be downloadedht

Do not place this product in a location exposed to moisture, dust,smoke, water, or in a car.• Otherwise, this may result in electric shock or fire. W

* Contact the video card manufacturer for details.Q: How can I set the Power Saving function?A: Windows XP:Set the resolution in the Control Panel → A

4. Turn off your monitor and reconnect the video cable; then turn on both your computerand the monitor.If your monitor screen remains blank after usin

Q: Can you see "Check Signal Cable" on the screen?A: (Connected using the D-sub cable)Check the signal cable connection.Q: If the power is o

Q: Have the screen colors become strange after running a program or due to a crashbetween applications?A: Reboot the computer.Q: Has the video card be

There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC)monitor found".Q: Have you installed the monitor driver?A:Ins

(Do not exceed 75 Hz when using the maximum resolution.)If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,

NoteBefore calling for assistance, check the information in this section to see if you can remedyany problems yourself. If you do need assistance, pl

SpecificationsGeneralGeneralModel Name SyncMaster 2033SNLCD PanelSize 20.0 inch (50 cm)Display area 442.8 mm (H) x 249.075 mm (V)Pixel Pitch 0.2768 mm

Environmental considerationsOperating Temperature : 50°F ~ 104°F (10°C ~ 40°C)Humidity : 10 % ~ 80 %, non-condensingStorage Temperature : -4°F ~ 113°F

This monitor is EPA ENERGY STAR® compliant andENERGY2000 compliant when used with a computerequipped with VESA DPM functionality.As an ENERGY STAR® Pa

Set a resolution and frequency appropriate to the product.• Otherwise, your eyesight may be damaged. If you continually move closer to the product sc

izontal Cycle is called the Horizontal Frequency.Unit: kHzVertical FrequencyLike a fluorescent lamp, the screen has to repeat thesame image many times

Dimensions (W x H x D) / Weight (Simple Stand)519 x 392.3 x 208.7 mm (20.4 x 15.4 x 8.2 inch) (With Stand) / 4.40 kg (9.7 lbs)VESA Mounting Interface1

State Normal Opera-tionPower savingmodePower off (Power but-ton) EPA/ENERGY2000Power Con-sumption45 watts Less than 1 watts Less than 1 wattsThis moni

Information{2033SN} For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on thecomputer as described below to en

During normal operation of a LCD panel, pixel image retention doesn't occur. How-ever, if the same image is displayed for a long time, a slight d

• Recommended settings: Bright colors with little difference in luminance• Change the characters color and background color every 30 minutesEx)• Every

Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II{2233SN} For Better Display Adjust the computer resolution and screen injection rate (refres

If excessive force is applied, you may stain it. If you are not satisfied with the picture quality, you can get better quality ofpicture by performing

Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems Werecommend that you follow set up of your display system program as bel

The best way to protect your monitor from Image retention is to set your PC orSystem to operate a Screen Saver program when you are not using it.Imag

Do not drop any objects onto the product or cause any impactto the product.• Otherwise, this may result in electric shock or fire. Do not use a humid

Our LCD Monitor satisfies ISO13406-2 Pixel fault Class IIInformation

Appendix{2033SN} Contact SAMSUNG WORLDWIDE NoteIf you have any questions or comments relating to Samsung products, please contact theSAMSUNG customer

EuropeBELGIUM 02 201 2418 http://www.samsung.com/beCZECH REPUBLIC 800 - SAMSUNG(800-726786)http://www.samsung.com/czDENMARK 8-SAMSUNG (7267864) http:/

Asia PacificAUSTRALIA 1300 362 603 http://www.samsung.com/auCHINA 800-810-5858400-810-5858010-6475 1880http://www.samsung.com/cnHONG KONG:3698 - 4698

Interlace and Non-InterlaceMethodsShowing the horizontal lines of the screen from the top tothe bottom sequentially is called the Non-Interlace method

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidentalor consequential damages in connection with the furnish

Latin AmericaTRINIDAD & TO-BAGO1-800-SAMSUNG(726-7864) http://www.samsung.com/lat-inVENEZUELA 0-800-100-5303 http://www.samsung.com/lat-inEuropeAU

CISKAZAKHSTAN 8-10-800-500-55-500 http://www.samsung.com/kz_ruKYRGYZSTAN 00-800-500-55-500 RUSSIA 8-800-555-55-55 http://www.samsung.ruTADJIKISTAN 8-

Vertical Frequency The screen must be redrawn several times per second inorder to create and display an image for the user. The fre-quency of this rep

Correct Disposal of This Product (Waste Electrical & Electronic Equip-ment) - Europe onlytract. This product should not be mixed with othercommerc

• Adjust the angle so that light is not reflected on thescreen.• Place your arms perpendicular to your sides andallow your arms to be level with the b