Samsung 270A - SRP Two-color Dot-matrix Printer Manuel de l'opérateur télécharger pdf (Page 7)

2-2. Connecting Interface Cable and Drawer

Cable to the printer

Connect the Host Computer(POS/ECR) to the printer using an interface cable that matches the

specifications of the printer and the Host computer(POS/ECR). Be sure to use a drawer that

matches the printer's specification.

1). Turn off both the printer and the Host computer(POS/ECR).

2). Plug the serial interface cable connector into the printer’ s interface connector, then

tighten the screws on both sides of the connector. In case of the parallel interface,

squeeze the wire clips on the printer together until they lock in place on both sides

of the connector.

3). Plug the drawer cable into the drawer kick-out connector on the back of the printer

next to the interface connector. Do not connect a telephone line to the drawer

kick-out connector; otherwise the printer and the telephone line may be damaged

4). Turn on the Printer and Host computer(POS/ECR).

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Pas de commentaire

Samsung 270A - SRP Two-color Dot-matrix Printer Manuel de l'opérateur Page 7