Samsung SIA-0010I Manuel d'utilisateur télécharger pdf (Page 6)

English _6

Hook the upper hole of the sensor ﬁ rst and ﬁ t the lower hole into the

wall bracket in the arrow direction.

Remove the slot-shaped ﬁ lling on the rubber hole of the sensor and

pull out the cables through the hole.

When done, adjust the optical axis and insert the cover.

To attach to the pole

Pull out the cables from the wiring hole of the pole; insert the

U-shaped pole bracket to the pole.

Attach the sensor to the bracket and arrange the cables as

necessary. (same as in wall-mounting)

Rubber Hole

Cable-In Hole

Pole bracket

(Optional)

Pole bracket (Optional)

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Samsung SIA-0010I Manuel d'utilisateur Page 6