Connecting to computers
The device can work as a standard external USB HDD when connecting to computers.
Please read the following instructions to do it correctly. If your computer has the Windows 98 system, please
install driver first before connecting the device to your computer.
1. Please be sure to TURN PFF before inserting the embedded USB cable to PC/Notebook.
2. Pull out the embedded USB cable and connect to the USB port of your computer.
3. Your computer will automatically detect the device and show up a new HDD icon at My Computer Menu.
The device will show a message “Connect to PC” on OLED display. Now it is ready to use.
Note:
When the device connects to the computer, it gets power from the computer. Very few models of computers
cannot provide enough power to use external USB HDD. You will find some strange behaviours of the device.
In these cases, we recommend you plugging the AC adapter into the device when connecting to your
computer.
Plug-in the adapter
4. Install drivers for Windows 98.
If your computer is using Windows 98, you need to install a driver before connecting to your computer.
You can go to our website in order to download drivers for Windows 98.
www.hama.de
19
While the battery is charging, the Battery Icon of OLED display will show the status.
Normally, it takes about 2 hours to recharge this battery completely. When the charging is finished, the
battery icon will become battery full status.
If the battery level is too low, the device will detect this situation and will automatically shutdown.
Meanwhile, the device will beep twice to inform you. This design can protect HDD and battery.
To protect HDD and contents from transient power change, please “don not switch the power during
charging”. If you still want to, switch it. Please un-plug the adapter before switching the power. After
having switched the power, you can plug-in the adapter again. The device can be charged in the ordinary
way.
Un-plug the adapter
Switch the power
Plug-in the adapter again
Note 1: We recommend you charging the battery fully for the first time.
Note 2: Only use bundled battery and adapter. Using other batteries and chargers could be dangerous.
How to Set Date & Time
When you turn-on the device for the first time, it will ash you to enter current date and time. The device
builds in an internal clock and automatically creates a new folder by date every time you copy files from
digital cameras, MP3 players, card readers, or any other USB mass storage devices.
1. You can use “up” and “down” keys to charge the value and use “left” and “right” to move the position to
set the value.
2. After having finished all settings, please press “OK” button. System will double confirm with you. Press
“OK” to confirm or press “left” to cancel.
Note: You can change date or time after the first setting. Select “Information” item at Main Menu, then
select “Set Time” item to repeat setting.
18
(9 pages)
(23 pages)
(1 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels