Samsung SCP-2370RH Manuel d'utilisateur télécharger pdf (Page 71)

English - 71

● SETUP

INITIALIZE

Power On Reset :

Restarts the camera.

Factory Default Set :

Enables resetting the camera to its factory default settings. When

the mode is selected, all custom data such as preset locations are

deleted from the camera.

Use this function if it is necessary to reset the settings of the camera.

Camera Default Set :

Reset the zoom module of the camera to the factory default. Use

this if you want to return the camera settings of such as Exposure

or Backlight to the factory default.

Auto Refresh :

Optimizes the settings of the electric circuits and component parts

of the camera on a regular basis.

This is useful for maintenance purpose, especially when the

camera faces a specific light source, or if the camera settings are

not maintained properly due to an extended time of recording

while rotating the camera in four directions.

Off, 1~7 Days : Selecting Off disables Auto Refresh and selecting

1~7 Days automatically executes it after 1~7 days has passed.

Auto Refresh takes about 10 seconds or less. Any sequence

operation that is being performed will be stopped and resume

after Auto refresh is completed.

Fan Life :Enables setting the Fan Life.

Message Display: The following warning message will appear 2 months before the expiry of the fan

life. “Fan Life Expired. Replace the Fans”

ON: Display the warning message. (Default)

OFF: Do not display the warning message.

[OFF] is to hide the message, rather than to delete it. Set it back to [ON]. Then, the warning

message will appear. (Only if you didn’t clear the message [Message Clear])

Message Clear: Use this if you want to delete the warning message when it pops up.

If you set [Message clear] to [On]after performing the command, no warning message will appear

on the screen.

Time Reset: Set to count the fan life again after replacing the fan. (However, this is available only

after you see a warning message that the fan life has expired.)

The fan life is counted only for an actual operation so the fan can be used longer than the

displayed time.

Time Remain.(hour):

49000 : Remaining life of fan (unit: hour)

The fan life will be updated when you access the [Fan Life] menu and if you press [ENTER] on the

[Time Remain.(hour)] item.

Initialize

Power On Reset

Factory Default Set

Camera Default Set

Auto Refresh OFF

Fan Life

Main Menu

Camera Setting

Sequence Setting

P/T Setting

OSD Setting

Alarm Setting

IR Illuminator

Initialize

Password Setting

Status

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Samsung SCP-2370RH Manuel d'utilisateur Page 71

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Samsung SCP-2370RH