Samsung OfficeServ 7030 Manuel d'installation télécharger pdf (Page 22)

CHAPTER 1. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.

Figure 1.3 Right Side View of the OfficeServ 7030 Cabinet

The descriptions of each part located on the right of the cabinet are listed in the table below.

Table 1.5 Parts located on the right panel of the cabinet

Part Function

C.O 1-4 Trunk ports.

LAN LAN port.

MISC Ports that connect external audio devices, paging device, loud bell,

common bell, or door bell.

LINK1-3 Ports that connect the base cabinet with the expansion cabinet

EXT1-8 Station ports for subscribers (i.e analog phone, digital phone, LAN)

SLT1, 2 Station ports for analog phones.

Reset Button for resetting the system.

1.6 System Installation Procedure

The system installation procedure is as follows:

1) Open the cabinet

2) Ground to the ground lug in the basic cabinet.

3) Remove the cabinet's dummy parts to insert the daughter boards

4) Insert the daughter boards into the universal slots (slot 2, 3 and 4).

5) Install the cabinet on a wall, if necessary, depending on the installation environment

6) Connect and tie the cables with the cable ties.

7) Connect the AC 220

200~240 V input power.

1-6

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 76 77

Pas de commentaire

Samsung OfficeServ 7030 Manuel d'installation Page 22