Samsung LN46A650A1FXZA Manuel d'utilisateur télécharger pdf (Page 86)

English - 84

Network Connection (Static IP) and Manual Setup

The procedures to set up the network using a static IP address are described below. You have to manually enter the IP

address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).

LAN Connection for Static IP Environment

TV Rear Panel

LAN Cable

The LAN Port

on the Wall

1. Connect the [LAN]

port on the rear

panel of the TV

and the LAN port

on the wall using

a LAN cable.

TV Rear Panel

Modem Cable

IP Sharer

LAN Cable

The LAN Port on

the Wall

You can connect the LAN via a Sharer (Router).

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS.

You must enter these values to complete the network settings. If you do not know the values, ask your network

administrator.

For the information on how to congure and connect a Sharer (Router), refer to the owner

’s manual for the

corresponding product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router).

If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.

For the procedures to use a static IP address, ask your Internet Service Provider.

➣

BN68-01429C-Eng.indb 84 2008-02-26 ¿ÀÈÄ 5:14:39

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 221 222

Pas de commentaire

Samsung LN46A650A1FXZA Manuel d'utilisateur Page 86