Samsung WAM270 Manuel d'utilisateur télécharger pdf (Page 69)

Symptom Check Remedy

HUB doesn't work properly

• Is the HUB plugged in?

• Is the LAN cable connected to

the wireless router and the HUB

properly?

• When the Hub is plugged in, do

the HUB's front indicators show

it's operating properly?

• Plug in the HUB.

• Connect the LAN cable to the

ETHERNET SWITCH on the back

of the HUB and to your wireless

router.

• Reset the HUB (see page 66).

Press here

• If you experience troubles with

connecting the HUB and Link

Mate, try relocating the Link Mate

so that the Link Mate is closer to

the wireless router or HUB.

Link Mate doesn't work properly

• Is the Link Mate plugged in?

• Does the Link Mate's top LED

indicator remain red 5 minutes

after you turn it on?

• Plug in the Link Mate.

• Check whether the Wi-Fi router

you're using had been certified for

Wi-Fi.

• Unplug the Link Mate, plug it back

in, and then reconnect it to the

router.

• Reset the Link Mate (see page

66).

Press here

• If used with a HUB

- Make sure the smart device and

the HUB are connected to the

same Wi-Fi network.

- Make sure the HUB's indicator

LED's show that it is working

correctly. (See page 14, item 3.)

Press here

- If the problem persists, reset the

HUB (see page 66).

Press here

- Unplug, then plug in the HUB.

Then, unplug and plug in the

Link Mate.

- If you experience troubles with

connecting the HUB and Link

Mate, try relocating the Link

Mate so that the Link Mate is

closer to the wireless router or

HUB.

69

44

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 82 83

Commentaires sur ces manuels

Pas de commentaire