Samsung WF457ARGSGR/A2 Manuel et guide de l'utilisateur télécharger pdf (Page 36)

36_ Washing a load of laundry

Washing a load of laundry

7. The My Cycle “None1” is changed to “J’s

Wash” in the My Cycle list on the 

 screen.

Starting a My Cycle

Follow the steps below to start a My Cycle to wash your laundry.

1. Tap the My Cycle button in the  screen. It will expand and show a list of 3

My Cycle buttons.

2. Tap a My Cycle button.

3. Press the Start/Pause button to start your wash.

Using the Delay Start function

By activating the Delay Start function, you can set your washer to start your wash automatically

at a speciﬁed later time.

Activating

Follow the steps below to activate the Delay Start function.

1. Tap the Delay Start OFF ( ) button located

at the bottom right of the 

screen. The  screen is displayed.

2. Tap the up / down arrows to set a time.

3. If the Smart Grid function is available, you can allow your washer to ﬁnd the most energy

ecient time (called the most eco-friendly time) to run your wash within a range of the time

you set.

4. Tap the OK button to activate the Delay Start function with the options you set.

Tap the Cancel button to cancel the function.

5. You are returned to the  screen. You will see that the Delay Start OFF (

)

button has been changed to the Delay Start ON (

) button.

Deactivating

Follow the steps below to deactivate the Delay Start function.

1. Tap the Delay Start ON (

) button located at the bottom right of the 

screen. The Delay Start function is deactivated and the button changes to the

Delay Start OFF (

) button.

WF457ARG-03153A-09_EN.indd 36 2014/4/30 15:17:24

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 239 240

Pas de commentaire

Samsung WF457ARGSGR/A2 Manuel et guide de l'utilisateur Page 36