Samsung BD-J5500 Manuel d'utilisateur télécharger pdf (Page 8)

Connecting to a TV

Connect an HDMI cable from the HDMI OUT jack on the back of the product to

the HDMI IN jack on your TV.

- Do not connect the power cord to the wall outlet until you have made all the

other connections.

- When you change the connections, turn off all devices before you start.

Audio

Video

✎

NOTES

If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital

Audio Out on the player to an audio system to hear audio.

An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of

your TV.

When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the

first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.

HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on

the screen.

Remote Control

Tour of the Remote Control

SCREEN

A-BVIEW

FULLBONUS REPEAT REPEAT

AUDIO HOME SUBTITLE

Turn the player on and off.

Allows you to repeat A-B disc.

Press numeric buttons to operate options.

Press to open and close the disc tray.

Use to enter the disc menu.

Press to skip backwards or forwards.

Press to stop a disc.

Press to use Bonusview function.

Return to the previous menu.

These buttons are used both for menus on the

player and also several Blu-ray Disc functions.

Use to select menu items and change menu

values.

Press to use Tools menu.

Use to access various audio functions on a

disc (Blu-ray Disc/DVD).

Press to play a disc.

Press to pause a disc.

Turn the TV on and off.

Press to switch the Blu-ray Disc/DVD's

subtitle language.

Use to enter the popup menu/title menu.

Press to search a disc backwards or

forwards.

Press to move to the home menu.

Press to see the full screen on a TV.

During Blu-ray or DVD disc playback, the full

screen button does not operate.

Press to exit the menu.

Use to display the playback information.

Allows you to repeat a title, chapter, track or

disc.

TV volume adjustment.

After setup, allows you to set the input

source on your TV.

Installing batteries

✎

NOTES

If the remote does not operate properly:

•

Check the polarity (+/–) of the batteries.

•

Check if the batteries are drained.

•

Check if the remote sensor is blocked

by obstacles.

•

Check if there is any fluorescent lighting

nearby.

CAUTION

Dispose of batteries according to local

environmental regulations. Do not put them

in the household trash

Do not dispose of batteries in a fire.

Do not short circuit, disassemble or

overheat the batteries.

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type.

Connections

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 47 48

Commentaires sur ces manuels

Pas de commentaire

Samsung BD-J5500 Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Samsung BD-J5500