Samsung DV52J8700GW Manuel du propriétaire télécharger pdf (Page 26)

26 English

Installation

Connecting the inlet hose

Method1

The dryer must be connected to the cold

water faucet using the new inlet hoses. Do

not use old hoses. (long hose : Canada model

only supplied)

1. If space permits, attach the brass female

end of the “Y” connector to the cold

water faucet.

2. Turn the cold water faucet off.

3. Attach the straight end of the long hose

to the “Y’ connector.

4. Using pliers, tighten the coupling with

an additional two-thirds turn.

NOTE

Do not overtighten, as it may damage the

coupling.

5. Attach the angled end of the long

hoses to the ll valve at the bottom of

the dryer’s rear frame. Screw on the

coupling by hand until it is seated on the

ll valve connector.

6. Using pliers, tighten the coupling with

an additional two-thirds turn.

NOTE

Do not overtighten, as it may damage the

coupling.

7. Turn the cold water faucet on.

8. Check for leaks around the “Y” connector,

faucets, and hoses.

DV8000J-03170M-01_EN-US_150122.indd 26 2015/1/23 16:29:58

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 89 90

Pas de commentaire

Samsung DV52J8700GW Manuel du propriétaire Page 26