operating your camera
22_ Operating Your Camera
3. Use the Right/Left buttons to select a desired function.
• Move the button right or left to display available values or settings.
Set the desired setting value using the button.
4. To finish, select <EXIT> and press the SET button.
M
`
An item with the
icon also has sub menus. To select a sub menu, select an item with the icon
and press the Function Setup switch.
`
An item with the --- icon is unavailable due to function settings.
EXPOSURE
1. When the SETUP menu screen is displayed,
select <EXPOSURE> by using the Function
Setup switch so that the arrow indicates
<EXPOSURE> .
2. Select a desired mode using the Function
Setup switch.
• BRIGHTNESS : Adjust the screen brightness.
• SHUTTER : You can select the shutter.
- ESC : Select this to control the shutter speed
automatically. If ESC is selected, the shutter
speed is automatically controlled depending on
the ambient illumination of the subject.
- MANUAL : You can control shutter speed
manually(
(1/30~1/16,000
、
x2~x60)
)
- A.FLK : Select this when you experience
picture flicker, this happen when there is a
clash with the installed lighting frequency.
J
`
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
`
Carefully position the camera when installing, since produced image quality might be poor if
framing a bright light source while the shutter mode of EXPOSURE is set to AUTO.
MAIN SETUP
1. EXPOSURE
2. WHITE BAL ATW
3. SSDR ON
4. BACKLIGHT OFF
5. SSNR3 ON
6. DAY/NIGHT AUTO
7. PROFILE BASIC
8. SPECIAL
9. EXIT
►
EXPOSURE SETUP
1. BRIGHTNESS
.... ....
*
.... ....
50
2. SHUTTER ESC
3. AGC HIGH
4. SENS-UP AUTO
5. DEFOG ---
6. RETURN
►
SCD-6021-ENGLISH-131230.indd 22 2014-3-12 15:28:22
Commentaires sur ces manuels