Samsung DV457GVGSGR-AA Manuel d'utilisateur télécharger pdf (Page 18)

English - 18

Installing your dryer

CONNECTING THE INLET HOSE

Method 1

The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old

hoses.

1. If space permits, attach the brass female end of the “Y”

connector to the cold water faucet.

2. Turn the cold water faucet o .

3. Attach the straight end of long hose to the “Y’ connector.

4. Using pliers, tighten the coupling with an additional two-

thirds turn.

Do not overtighten, as this may damage the coupling.

5. Attach the angled end of long hoses to ﬁ ll the valve at the

bottom of the dryer’s rear frame. Screw on the coupling by

hand until it is seated on the ﬁ ll valve connector.

6. Using the pliers, tighten the coupling with an additional two-

thirds turn.

Do not overtighten, as this may damage the coupling.

7. Check that the water faucets are on.

8. Check for leaks around the “Y” connector, faucets and

hoses.

Duct Exhaust

Frame

(back)

Water Hose

Y-Connector

Water Hose

DV457E(G)_02836E-08_EN.indd 18DV457E(G)_02836E-08_EN.indd 18 2014-04-28  6:13:162014-04-28  6:13:16

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 227 228

Pas de commentaire

Samsung DV457GVGSGR-AA Manuel d'utilisateur Page 18