Samsung LS24EDBLB-XAA Manuel d'utilisateur

iiLCD MONITORquick start guideSyncMaster XL24

A. Monitor B. Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-dow

Insert the hooking parts ( ) of both hoods starting from the top and moving downwards into the grooves ( ) near the left and right edges at the back

Check List Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need ass

display will work properly but the "Not Optimum Mode", "Recommended Mode 1920 x 1200 60 Hz" message appears for one minute and the

The screen colors have changed after changing the video card.Settings. Has the video card been set properly?Set the video card by referring to the v

Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on th

Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealerto buy op

Power Cord DVI CableUSB Cable (A-B Type cable) Others Calibrater For more information on the use of the calibrater, see Natural Color Ex

MODE button (= Color Mode) Press this button to select a Color Mode. Continuing to press the button, will repeatedly display the setting m

Rear (The configuration at the back of the monitor may vary from product to product.) DVI Connect the DVI terminal of your monitor to your co

Kensington Lock The Kensington lock is a device used to physically fix the system when using dit in a public place. (The locking dev

Connecting the Monitor Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. Plug the

Changing the Stand and Installing the Hoods Sliding Stand Stand Stopper Swivel stand Using ( ),You can swivel the monitor left and

Using ( ), You can adjust the tilt angle forward and backward for the most comfortable viewing angle. Removing the base 1. Turn off your monitor