Samsung SPC-2010 Manuel d'utilisateur télécharger pdf (Page 30)

menu setting

30_ menu setting

Joystick’s Serial Command Transfer Cycle

Select a PTZ serial command transfer cycle for using the joystick.



Shortening the transfer cycle increases the response speed of the camera.



Shortening the joystick’s serial command transfer cycle may cause certain camera models to not process commands

properly.

To prevent and resolve such malfunctions, extend the transfer cycle.

Password

You can set the controller password.

Enter a new password.



The default password is “4321”.



The default password can be exposed to a hacking thread so it is recommended to change the password after

installing the product.

Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

Factory Set

Resets the controller’s current settings to the factory release default values

and optimizes the joystick calibration.

[



MAIN SETUP



]

7. JOY SPD : 100MS

[



MAIN SETUP ]

8. PASSWORD

****

[



MAIN SETUP ]

9. FACTORY SET

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Pas de commentaire

Samsung SPC-2010 Manuel d'utilisateur Page 30