Samsung AJ24FBADEC/SP Manuel d'utilisateur télécharger pdf (Page 43)

Final check and trial operation

To complete the installation, perform the following checks and tests to

ensure that the air conditioner operates correctly.

Check the followings:

•Strengthoftheinstallationsite

•Tightnessofpipeconnectiontodetectgasleak

•Electricwiringconnection

•Heat-resistantinsulationofthepipe

•Drainage

•Groundingconductorconnection

•Correctoperation(followthestepsbelow)

1. Press the Power

button and check the following:

 

The indicator on the indoor unit lights up.



The airow blade opens and the fan gears up for operation.

3. Press the Air swing

button and check the following:

 

The airow blades work properly.

4. Press the Power

button to stop the operation.

2. Press the Mode button to select Cool mode.

 

In Cool mode, use Temp hr. + or – button and set the temperature at 16°C.



Cooling mode (indoor unit check) Inletairtemp.-Outletairtemp:

From 10°C to 12°C (indicative delta T)

• Approximately3~5minuteslater,outdoorunitwillstarttooperateandthe

Cool air will blow out.

• After12minutesofstationaryconditionchecktheindoorunitairtreatment.

• Whenyoucompletetheinstallationsuccessfully,handoverthismanualtotheuserforstorageinahandyandsafe

place.

English-43

INSTALLATION05

1 2 ... 38 39 40 41 42 43 44 45 46 47

Pas de commentaire

Samsung AJ24FBADEC/SP Manuel d'utilisateur Page 43