Samsung NZ64K7757BK Manuel d'utilisateur télécharger pdf (Page 20)

20 English

Hob use

Timer (Count up)

For the count up timer to be used, the appliance must be switched on but all the

cooking zones must be not use timer as a safety shutoff.

1. Touch the Timer control sensor.

will appear in the timer display.

2. The count up timer function becomes

active and the display numbers

increase over time. To cancel the timer

settings, hold down the Timer control

sensor for 2 seconds.

3. To stop the timer, touch the Timer

control sensor.

4. To cancel the timer settings, select the

target burner and hold down the Timer

control sensor for 2 seconds. This

will cancel the burner’s timer settings

with a beep. If holding down the Timer

control sensor for 2 seconds without

selecting a burner, this will cancel

the timer settings of the last changed

burner.

To display the time remaining for any of the cooking zones, use the Timer control

sensor after select burner.

The corresponding control indicator will begin to blink slowly.

The settings are reset using the Timer setting sensor ( or ). After the set period

of time has elapsed, the cooking zone automatically switches itself off, an acoustic

signal sounds as conrmation and the timer display indicates.

NOTE

To change the settings quicker, touch and hold any of the or control sensors

until the desired value is reached.

NZ64K7757BK_EU_DG68-00790A-01_EN.indd 20 5/29/2017 2:24:29 PM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Pas de commentaire

Samsung NZ64K7757BK Manuel d'utilisateur Page 20