Samsung SRP-275 Manuel de l'opérateur télécharger pdf (Page 8)

1-71-6

Setting up the printer

CHAPTER 1

1.8 Installing wall mount (Option)1.7 Changing the frame control paper position

1) Turn the Set over and attach the Bracket hanger

to the Frame base then tighten four screws.

2) Attach the Bracket mount to the wall firmly with

the eight screws. Be sure that the Bracket

attached properly to match the direction of arrow

as shown. And the Bracket mount should be

always fixed vertically.

3) Insert the Bracket hanger of Set to the Bracket

mount as shown.

1) Open the rear cover.

2) Remove the frame control paper by loosing

the two screws(3 x 6).(76 mm default)

3) Reattach the frame control paper in you want.

(Insert and tighten two screws(3 x 6) to reattach.)

4) Close the rear cover.

5) Change the Memory Switch setting for changing

paper roll width. (See the instructions "Setting the

Memory Switches"(3.1) in Chapter 3.)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 109 110

Pas de commentaire

Samsung SRP-275 Manuel de l'opérateur Page 8