4-20
Operation Manual
M Mode Screen
■
M Line
Use the trackball on the control panel to move to the right or left. The M Line indicates the relative
position of the M Mode image in the 2D image. Therefore, you can move the M Line to change the
observation area.
M Mode Menu
■
Anatomical M
Pressing Anatomical M on the touch screen changes to Anatomical M mode. In this mode, you can
adjust the length of the M line, and adjust the positions of the M1 and M2 points using the Change
button.
NOTE: This is only supported in Phased Array Probe or Cardiac applications.
■
Sweep Speed
Tap Sweep Speed on the touch screen. Select 60Hz, 120Hz, 180z, 240Hz, 300Hz, or 360Hz by using
the dial-button on the touch screen.
■
Negative
Turn it on or off by tapping Negative on the touch screen.
This function inverts the color of M images.
■
Display Format
Tap Display Format on the touch screen. Select between Top/Bottom and Side by Side by tapping
the relevant button on the touch screen or using the dial-button.
NOTE: This function is available only when Utility > Setup > General > Option > M/PW Loop
Side By Side is set to Allow.
■
Loop Size
The Loop Size can be changed to a range of values between 30 and 70 by tapping the relevant
button on the touch screen or using the dial-button.
Commentaires sur ces manuels